Suction strainer
Product Description
Approximately 80% of all hydraulic component failures are attributed to surface degradation caused by contamination and corrosion. Proper filter selection and sizing will provide years of reliable equipment operation and save money that is lost in fighting contamination-related failures.
The cost of installing and maintaining suitable filtration is estimated to be 3% of the cost associated with contamination related issues.
The purpose of a suction filter screen is to protect the pump from large particles found in the reservoir. A filter screen is located on a suction port of the pump or attached to the suction pipe leading to the pump.
Suction strainer elements are only intended to protect hydraulic pumps against catastrophic failure caused by coarse contaminant. These elements can be installed directly onto the pump suction line and should always be below the minimum fluid level of the tank.
Suction strainer elements should not be used as the only filtration elements in a hydraulic system. Pressure filters and return line filters, with reasonable dirt holding capacity, must be installed to provide protection against component damage caused by fine contaminants.
Suction strainer elements should be inspected and cleaned regularly.
FEATURES:
- Low cost maintenance.
- Compact & lightweight.
- Complex structure, high filtering precision.
- Large dirt holding capacity, long service life time.
- Good corrosion resistance and pressure resistance.
- Fluid flow through the filter element from OUT to IN
PRODUCT SPECIFICATIONS
Product Name
Suction Strainer filter.
Brand
3R
Replacement filter Equivalent to
Hydac, Pall , Rexroth, Donalson, MP Filtri, EPE, parker, Argo hytos.
Filter Type
Hydraulic oil filter
End cap, M.O.C
Aluminium, Nylon, Stainless Steel, m.s etc.
Filter Material
wire mesh.
Mesh m.o.c
Stainless steel 304/316 , brass , pB etc.
Mesh type
Plain weave,twill weave, dutch weave etc
Filtration Rating
150µ ,200µ,220µ etc (As per your requirement)
Filtration Efficiency
90%
Connection type
Male thread or female thread.
Port size
3/8",1/2", 3/4",1",1 ¼”, 1 ½”,2",2 ½”, 3" etc.
Design Temperature
-25℃-110℃
Size/Dimension
Standard or ( As per requirement).
Flow direction
outside to inside.
flow rate
up to 995L/min
Surface treatment
Mirror polishing or electrolytic polishing or powder coated
Usage Type
Hydraulic oil Filtration.
Product Name | Suction Strainer filter. |
Brand | 3R |
Replacement filter Equivalent to | Hydac, Pall , Rexroth, Donalson, MP Filtri, EPE, parker, Argo hytos. |
Filter Type | Hydraulic oil filter |
End cap, M.O.C | Aluminium, Nylon, Stainless Steel, m.s etc. |
Filer Material | wire mesh. |
Mesh M.O.C | Stainless steel 304/316 , brass , pB etc. |
Filtration Rating | 150µ ,200µ,220µ etc (As per your requirement) |
Filtration Efficiency | 90% |
Connection type | Male thread or female thread. |
Design Temperature | -25℃-110℃ |
Size/Dimension | Standard Or ( As Per Requirement). |
Flow direction | outside to inside. |
Port size | 3/8″,1/2″, 3/4″,1″,1 ¼”, 1 ½”,2″,2 ½”, 3″ etc. |
flow rate | up to 995L/min |
Usage Type | Hydraulic oil Filtration. |
APPLICATIONS
Fossil Power generation industry is one industry that uses hydraulic oil filter to remove particles ingested in the hydraulic circuit of operations. Before entry into the reservoir, return line filters are installed to remove particles of medium flow. This avoid reintroduction of impurities into the systems reservoir.
Hydraulic oil filter have built a reputation for oil and gas industry, helping instrumentation Technicians and engineers carry on robust filtration.
Hydraulic oil filter are best for fluid sample analyzing in most filtration systems. This is because they can coalesce, trap particulate etc. Factory machines together with complete lines of production rely on hydraulic oil filters to stop oil contaminates from causing irreversible damage to factory equipment.
Hydraulic oil filter are also playing very important roles in the petrochemical processing industry as they are specially installed just after the pump. The petrochemical processing plants have fragile and sensitive components, instrumentation and parts like valve,meters,gauges etc., Therefore, using hydraulic pressure oil filters provides adequate protection for such equipment.
Industrial hydraulic oil flter are used to protect offshore rigs during oil drilling. Most drilling equipment utilizes hydraulic machine that must ran at optimum performance Specification. To avoid debris, dirt and other fluid particulates from , unnecessary hydraulic system breakdown, they fit hydraulic oil filters
Marine hydraulic and machinery stems are installed with hydraulic oil filter to improve the engine performance and reliability. The huge fuel and oil reservoir of ship are built with advanced and efficient filtration mechanism that have been conveniently installed with hydraulic oil filters. This is to make sure that engines and hydraulic systems are supplied with clean fuel and oil that has no sludge and system contamination ingestion. These oil filters continuously and vigorously filter out oil and fuel impurities.
Hydraulic oil filter serve as kidney loop in industrial vehicles like heavy earth moving :bulldozers, excavators, tractors, and many more. As the engine runs, lube and oil systems circulate medium from reservoirs of hydraulic oi filters.
Address List
- 7-2-221/16, Ashok Colony, Sanathnagar,Hyderabad-500018.
- +91-7032799545
-
[email protected]
[email protected]
Social Networks
Rafeeq Filtration Systems
Our Ultimate aim is to satisfy Our Clients With Our Services.